10-11 Thrust

[gmbtempe]

I find these statements confusing.

First in 10-11

Again – any time Accumulators #2 and #3 (the Hands) are employed, but not
only Pressure Points #1 and/or #4 (the Arms) are used to actuate the Secondary
Lever Assembly, so that Centrifugal Force alone actuates the Secondary Lever
Assembly, this would be the classic golf “Swing” and the Clubshaft would exhibit
to the “Rope Handle” characteristics mentioned in 2-K and 10-19.

Then in 10-11-0-1 Pressure Point 1

It is only a passive “direct drive” with any true Swing procedure – Right Arm (7-19) or Left
(6-B-3-0) – except per 2-M-3.

Then in 10-11-0-2

PP2 actuates the Secondary Lever Assembly (6-B-2), normally, only as
“Passive Clubhead Lag” (6-C-2-A). It is Loaded (7-22) per 6-B-2 and 7-19-3 and
is a Swinger’s Rope Handle application (2-K, 2-M-3).

So it mentions using #1 in the general paragraph for the classic swing and rope handle, yet in the discussion on PP1 it talks about #1 being for hitting and is PASSIVE in the swing procedure.

The as has been my understanding PP2 is used to create the Rope application. Can anyone explain what is meant by the General paragraph statement in context to 10-11-0-1 and 10-11-0-2?