h file or directory CF in hitting. - LynnBlakeGolf Forums

CF in hitting.

Emergency Room - Hitters

Reply
 
Thread Tools Display Modes
  #1  
Old 07-31-2012, 02:20 PM
HungryBear HungryBear is offline
Senior Member
 
Join Date: Nov 2008
Posts: 759
Originally Posted by Daryl View Post
Hitting Alignment. Loading the Primary Lever vs Loading the Secondary Lever.

Vary the Loading Action by Varying the Right Elbow Alignment. See Magic of the Right Forearm. At the End of Start-up, choose either to Pitch the Elbow (Standard Wrist Action) to load the Secondary Lever (Shaft), or raise the Elbow (Single Wrist Action) to Load the Primary Lever (Left Arm and Shaft).

Note that regardless of Loading action or Swinging or Hitting, the Impact Alignments are identical. The Flying Wedges are aligned at Right Angles, the Left Wrist is Flat and Level, the Right Wrist is Bent and Level, the Right Forearm is On-Plane, etc.

Note also, that because the Primary Lever is "Loaded", it cannot Swing (Throwout) although it will and should be pulled. If you make the mistake of trying to swing the Left Arm, the #3 PP will "Un-Load".

Swinging is Harnessing CF. Hitting is Overpowering CF. It's still there, it's no longer a factor.
Great info post on hitting , gets to the point doesn"t it?

I have been thinking about releases and started to wonder on a couple of things. I can swing, with either hand or both. That is a swinging procedure. BUT I can not hit with either hand by itself. The left must be there to checkrein the thrusting right hand. and complete a primary lever assembly. There are 2 pressure points in operation at the same time- #1 thrusting the primary lever assembly and an ACTIVE #3 which also keeps the secondary assembly "moving right along" There are all manner of options. For any stroke length, the #1 thrust can be increased or decreased- #3 pressure should follow. For any #1 thrust, the stroke length can be adjusted. #3 should follow and be constant. But, there can be an background amount of cf and it can come from a pulling, can be generated from the pivot and is realy #4 accumulator. It is background and care must be taken not to damage the work of either #1 thrust or #3 activity.

Like to hear your thoughts on this Daryl

HB

Last edited by HungryBear : 07-31-2012 at 02:36 PM.
Reply With Quote
  #2  
Old 07-31-2012, 04:16 PM
whip whip is offline
Senior Member
 
Join Date: Sep 2009
Posts: 650
The right forearm is always driving but it is active or being driven by the swinging left arm
Reply With Quote
  #3  
Old 07-31-2012, 04:26 PM
O.B.Left O.B.Left is offline
Senior Member
 
Join Date: Mar 2006
Posts: 3,433
I think of the primary lever as being like a swinging door . You push it closed with right arm thrust but it swings closed. With cf . The. Cf is in the door not the thrusting device.

In hitting we thrust the entire primary lever. But don't employ cf to initiate release of 2 or 3 . We use the muscular drive out of a right arm throw. The nature of the throw , the linear nature that is, changes with the location of bright elbow . Push vs punch vs pitch. Pitch and hiting perhaps being dangerously to active right arm pulling swinging.

Last edited by O.B.Left : 07-31-2012 at 04:47 PM.
Reply With Quote
  #4  
Old 07-31-2012, 05:13 PM
BerntR's Avatar
BerntR BerntR is offline
Senior Member
 
Join Date: Feb 2005
Posts: 981
Great clarification, OB.
__________________
Best regards,

Bernt
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 12:31 AM.


Design by Vjacheslav Trushkin, color scheme by ColorizeIt!.
directoryDatabase Error: Unable to connect to the database:Could not connect to MySQL